Jonsered CS 2240 Manual de usuario descargar pdf (Pagina 43)

44 – English

First remove the old fuel lter from the tank unit

using special tool 502 50 83-01.

Pull the fuel hose (B) out of the tank unit and pull

off the lter.

Fit the new fuel lter (A) and feed the fuel hose

back into position.

7.20 Replacing the fuel hose/

return hose

The fuel hose is moulded and can only be removed

from outside of the fuel tank.

Use suitable pliers with a plain cutting face and

loosen the hose (B) (see gure 45) from the fuel

tank. Align the cut-out against the plastic pin when

assembling. Replace the return hose when required.

7.21 Replacing the air-purge

Dismantling

1. Dismantle the cylinder cover and the air lter.

2. Loosen the suction hose (C) and return hose

from the fuel pump (see gure 31).

3. Unsnap the fuel pump from the lter holder.

Assembling

1. Fit the return hose on the fuel pump.

2. Snap the purge into the lter holder (see gure

51).

4. Assemble the air lter and cylinder cover.

NOTE!

Do not use knurled pliers to disconnect or

reconnect the fuel hose. This could dam-

age the hose and lead to leakage or frac-

ture.

Repair instructions

7.19 Replacing the fuel ﬁlter

Fig 51

Fig 52

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 54 55

Sin comentarios

Jonsered CS 2240 Manual de usuario Pagina 43